Botz PRO 9622 Amethyst liquid glaze, violet, 200 ml

Botz PRO 9622 Amethyst – violet liquid glaze for earthenware and stoneware

Botz PRO 9622 Amethyst is a ready-to-use liquid glaze in a glossy, semi-transparent violet. You can use it across a very wide firing range of 1020 to 1280 °C, so it works on earthenware, early-vitrifying clay, stoneware and porcelain. If you fire different clays, you do not need a separate glaze for each temperature.

The colour depends on the firing temperature. In the earthenware range from 1020 °C, Amethyst turns a strong colour and is almost opaque. At around 1150 °C the colour is retained, but the surface becomes semi-transparent. At high-fire temperatures the glaze gives a glassy, semi-transparent surface in an intense pastel shade. Because it is semi-transparent, the colour of your clay also affects the result. A test tile made from your clay will show you beforehand how the glaze looks on it.

Applying the glaze

Stir the glaze well before use and apply it with a brush to the clean, bisque-fired clay body. Let each coat dry properly before applying the next. How many coats you apply depends on the firing temperature:

• From 1020 °C (earthenware): 2–3 coats, almost opaque, strong colour
• Around 1150 °C (early-vitrifying clays): 2 coats, semi-transparent surface, colour retained
• High fire up to 1280 °C and on porcelain at 1250 °C: 2 coats, glassy and semi-transparent in an intense pastel shade

Avoiding runs

When applied thickly, Amethyst tends to run, especially from 1150 °C. It is therefore better to apply the glaze in several thin coats rather than one thick one, and to leave a narrow strip unglazed at the foot of the piece. You can also protect the kiln shelf with kiln wash or a waster slab. For decoration, the glaze can also be combined with Botz Unidekor, according to Botz.

Botz PRO 9622 Amethyst product details

• Manufacturer: Botz, PRO series, art. no. 96222
• Colour: 9622 Amethyst, violet
• Surface: glossy, semi-transparent
• Firing range: 1020–1280 °C
• Suitable for earthenware, stoneware and porcelain; also suitable for raku
• Ready to use, solvent-free acrylic binder
• Contents: 200 ml
• Origin: Made in Germany

You will also need: brush for application; kiln wash or waster slab to protect the kiln shelf

Keep out of reach of children. According to the Botz safety data sheet, the product is not classified as hazardous. Do not leave children unattended when glazing. Do not eat, drink or smoke. Avoid contact with skin and eyes. Spilt product is slippery. When firing, ventilate the room and, where possible, vent fumes outdoors. Store the container tightly closed, frost-free and protected from sunlight, out of reach of children and away from food.