Botz PRO Liquid Glaze 9319 Peridot, 200 ml

Botz PRO 9319 Peridot – warm green with fine brown specks

Botz PRO 9319 Peridot is a ready-to-use liquid glaze for earthenware and stoneware in a warm, slightly yellowish green with fine brown specks. The surface is glossy and semi-transparent. The glaze can be used across a wide firing range of 1020–1280 °C, so you don't have to commit to a single firing temperature.

How Peridot looks depends on the temperature: the higher you fire, the glassier and more transparent the surface becomes. Because it is semi-transparent, the colour of your clay body also shows through. A test piece on your own clay will show you beforehand how the result turns out for you. The tub contains 200 ml.

How Peridot looks at different firing temperatures

The glaze changes its appearance with the firing temperature:

• 1050 °C: natural brown dots, almost opaque, apply 2–3 coats
• 1150 °C: finely speckled with a more semi-transparent surface, 2 coats
• 1250 °C: glassy, semi-transparent surface with slightly more running, delicate dots, 2 coats

Application and firing

Stir the glaze vigorously before use. If it is too thick, add a little water. Apply it in 2–3 coats and let each coat dry. The glaze must be thoroughly dry before firing. From 1150 °C, Peridot tends to run if applied thickly. So do not apply it too thickly, especially on the lower part of the piece, leave the foot unglazed and protect the kiln shelf with kiln wash. The glaze combines well with Botz Unidekor.

Peridot on dinnerware

Botz recommends the PRO glazes for tableware. For this, the clay body must be vitrified. With earthenware in the range of 1020–1100 °C, many clays are not yet vitrified, so you should not use such ceramics for liquids over a long period. If you sell dinnerware, you are yourself responsible for its suitability for food contact.

Botz PRO 9319 Peridot product details

• Manufacturer: Botz, PRO series
• Colour: 9319 Peridot
• Contents: 200 ml
• Firing range: 1020–1280 °C
• Surface: glossy, semi-transparent, plain colour with fine brown specks
• Application: 2–3 coats, 2 coats at 1150 °C and 1250 °C
• Suitable for raku
• Origin: Made in Germany

You will also need: brush for application, kiln wash for the kiln shelf

Exempt from hazard labelling according to Botz (catalogue 2024). Do not eat, drink or smoke when glazing, and wash your hands afterwards. Ventilate the kiln area well. Let children glaze only under supervision. Keep glazes out of reach of children.