Graine Créative 5-cavity soap mould, 5 designs

Soap mould with 5 designs – for your own soaps and solid cosmetics

The 5-cavity soap mould from Graine Créative is a plastic mould that lets you cast five soaps with different designs in one go. You can use it for your own soaps, shampoo bars and solid cosmetics. Each design measures approx. 5 × 5 × 2 cm, so you can plan the size and number of your pieces easily.

The mould is thermoformed. Five different designs in one mould work well for small soap gift sets, as you do not need a separate mould for each design.

Casting your soaps

Melt the melt-and-pour soap in a heatproof container following the instructions on the pack, stir in colour and fragrance, and pour the mixture slowly into the cavities. Do not pour hotter than necessary and follow the temperature guidelines for your soap base. Fill each cavity only up to the edge so the soaps have smooth borders. If air bubbles form on the surface, a spritz of alcohol straight after pouring helps. Let the soaps cool completely and set before carefully removing them from the mould. Release is easiest if you flex the mould slightly and gently push the soap out from below.

Graine Créative 5-cavity soap mould product details

• Manufacturer: Graine Créative, art. no. 200402
• Contents: 1 mould with 5 different designs
• Material: plastic, thermoformed
• Size of each design: approx. 5 × 5 × 2 cm

You will also need: melt-and-pour soap (soap base), soap colour and fragrance if desired, a heatproof container for melting the soap

Once a mould has been used for soap, do not use it for food again.