Graine Créative Tiger Soap Mould, 55x50x20 mm

Graine Créative Tiger Soap Mould – Make Soap with a Tiger Design

With the Graine Créative tiger soap mould, you can cast soap with a tiger design, for example as guest soap or as a homemade gift. The mould is made of clear, thermoformed plastic and is designed specifically for melt-and-pour soap. The soap block size is 55 × 50 × 20 mm. You need approx. 50 g of soap per mould, so it is easy to plan the amount for several pieces.

The mould is suitable for white or transparent melt-and-pour soap. If you colour the soap, the tiger design stays clearly visible thanks to the sharp outline.

Making the soap

Melt the soap base in the microwave or in a bain-marie. Stir soap colour, fragrance or glitter into the liquid soap and pour it slowly into the mould so that as few air bubbles as possible form. You can remove any remaining bubbles on the surface with a little isopropyl alcohol spray. Let the soap set completely before carefully removing it from the mould. If you use a dark colour, a test pour is worthwhile, as the tiger looks best when the colour is not too dark.

Good to know

Do not use the mould for food after soap making. After use, clean it with warm water and a little washing-up liquid.

Graine Créative Tiger Soap Mould product details

• Manufacturer: Graine Créative
• Design: tiger
• Material: plastic, clear
• Soap block size: 55 × 50 × 20 mm
• Capacity: approx. 50 g of soap
• Contents: 1 soap mould

You will also need: melt-and-pour soap base (white or transparent), a heatproof container for melting, soap colour and fragrance if desired