Artemio silicone mould for jewellery and pendants, 95 × 125 mm

Artemio silicone mould for jewellery and pendants – for small jewellery pieces

The Artemio silicone mould for jewellery and pendants (art. no. APM54) is a mould for small jewellery pieces, from earrings to necklaces. With a mould sheet measuring 95 × 125 mm, you can make your own jewellery without having to build moulds yourself.

Silicone is flexible: you can bend the mould slightly and so release finished pieces carefully. This protects fine edges and small details.

Working with the silicone mould

Place the clean, dry mould on a level surface so that the top of the jewellery pieces comes out flat. Before filling, check the information supplied with your material to see whether it is suitable for silicone moulds and which temperatures or curing times apply. Only release the finished piece once it has fully cured or cooled: to do so, gently bend the mould outwards from the edges and push the piece out from the back.

Other moulds in the series

If the designs are not quite what you are looking for, the series of silicone moulds for jewellery includes other variants: Fantasy, Drops & Triangle, Baby & Cat and Cabochon.

Artemio silicone jewellery and pendant mould product details

• Manufacturer: Artemio, art. no. APM54
• Material: silicone
• Size of the silicone mould: 95 × 125 mm (9.5 × 12.5 cm)
• Use: small jewellery pieces, from earrings to necklaces
• Contents: 1 silicone mould