Glorex Silicone Mould for Resin Jewellery Pendants, 122 × 146 mm

Glorex Silicone Mould – Resin Mould for Jewellery Pendants

With the soft silicone mould from Glorex, you can cast resin jewellery pendants in a variety of pendant shapes. The mould is made of flexible silicone. This makes it easy to push the cured pendants out, and you can use the mould again and again.

All the pendant shapes are combined in one sheet measuring 122 × 146 × 6 mm. So you can cast several pendants in one go and do not need to store a separate mould for each design. The depth of 6 mm gives flat pendants that are easy to wear on a chain, ribbon or key ring.

Casting your pendants

Place the mould on a flat, level surface so that the resin spreads evenly and the pendants come out straight. Mix the casting resin exactly as described in the manufacturer's instructions, stir slowly to keep air bubbles to a minimum, and fill the cavities in one go. Let the resin cure completely before you bend the mould and push the pendants out. Eyelets or bails are inserted as described in the resin instructions, or attached after curing.

Note on use

A mould that you have used for resin must not be used for food again. Also follow the safety instructions for your casting resin when working.

Glorex silicone pendant mould product details

• Manufacturer: Glorex, art. no. 62702506
• Material: soft silicone
• Shape: various pendant shapes
• Mould size: 122 × 146 × 6 mm
• Suitable for: casting resin
• Contents: 1 piece

You will also need: casting resin with hardener, mixing cup, stirring sticks, eyelets or bails, jewellery cord or chain