Cernit Macarons silicone mould – flexible, Ø 7 cm

Cernit Macarons silicone mould – flexible for moulding and casting

The Cernit Macarons silicone mould is a white, very flexible motif mould for polymer clay and epoxy resin. Because the silicone gives way, your creations come out of the mould more easily, even with fine details.

With a diameter of 7 cm, the motif suits jewellery, pendants, table decorations, home decor and fashion accessories. Cernit developed the mould specially for modelling clay. It is washable and reusable, so you can make as many impressions as you like.

Working with the mould

Press the modelling clay evenly into the mould and smooth it off at the top edge so that the back is flat. Soft, unhardened clay can lose its shape when removed. Leave it in the mould, harden it in the oven following the instructions for your modelling clay and only remove the piece once it has cooled. For epoxy resin, pour the mixed resin into the mould and leave it to cure according to the manufacturer's instructions.

Care

Wash the mould in soapy water after use. Do not use sharp tools in the mould, so that you do not scratch the silicone.

Cernit Macarons silicone mould product details

• Manufacturer: Cernit
• Motif: macarons
• Material: silicone
• Colour: white
• Diameter: Ø 7 cm
• Suitable for: polymer clay and epoxy resin
• Techniques: moulding and casting
• Properties: very flexible, washable, reusable, suitable for a conventional oven

You will also need: polymer modelling clay or epoxy resin; an oven for hardening the modelling clay

The mould is intended for modelling clay and resin, not for food. Once used for this purpose, do not use the mould for food again.