Artemio Silicone Jewellery Mould, Drop & Triangle, 95 × 125 mm

Artemio silicone jewellery mould – drop and triangle for small jewellery pieces

The Artemio silicone mould Drop & Triangle is for making small jewellery pieces, from earrings to necklaces. The mould is made of silicone and measures 95 × 125 mm. It gives you matching pieces for your own jewellery.

Silicone is flexible: you can easily bend the mould back and release the finished piece without delicate edges breaking off. The jewellery silicone mould range is also available with other motifs such as cabochon, pendant, fantasy and baby & cat.

Working with the mould

Place the mould on a level surface so that all the cavities are filled evenly. Check beforehand that your material is suitable for silicone moulds, and follow the manufacturer's instructions for it. Smooth off any excess material at the top edge so that the backs of the pieces are flat. Let the material set completely before demoulding. Then push the piece out of the cavity from the back, or bend the mould slightly until it comes free.

Which mould in the range?

Drop and triangle suit earrings and pendants that are meant to stand out as a single piece. If you are looking for other shapes or motifs, have a look at the moulds with cabochon, pendant, fantasy or baby & cat.

Artemio silicone mould Drop & Triangle product details

• Manufacturer: Artemio
• Series: Silicone moulds, jewellery
• Material: silicone
• Mould size: 95 × 125 mm
• Use: small jewellery pieces, from earrings to necklaces

You will also need: casting material suitable for silicone moulds and, depending on the piece of jewellery, eyelets, ear hooks or chains.