Prym sew-on snap fasteners 30 mm, black

Prym sew-on press studs 30 mm in black – large brass snap fasteners for sewing on

The Prym sew-on press studs (art. no. 341180) in black are round snap fasteners in rustproof brass, which you sew onto everyday clothing and accessories as a fastening and a visible decorative feature at the same time. Each press stud consists of a socket part and a ball part. The ball part has a rolled edge, so the fabric does not rest against sharp edges. The pack contains 2 press studs, 30 mm in size.

According to Prym, the range is available in silver, black and gold. At 30 mm, the studs stand out: use them where the fastening can be a design feature, for example on a jacket, a bag or a belt.

How to sew on the press studs

The four openings in the socket part and in the ball part give you fixed stitching points, so that the studs sit evenly and securely. Mark the position of both parts beforehand so that they line up exactly when closed.

• Place the socket part and the ball part on the marked positions.
• Sew through each opening several times with doubled thread until the stud is firmly in place.
• Fasten off the thread on the back and knot it.

Prym sew-on press studs 30 mm black product details

• Manufacturer: Prym, art. no. 341180
• Diameter: 30 mm
• Colour: black
• Material: rustproof brass
• Construction: socket part and ball part, ball part with rolled edge and locating hole
• Contents: 2 press studs

You will also need: sewing thread, a sewing needle and scissors; a thimble for thick fabric.