Rayher jump rings Ø 7.0 mm, 30 pieces

Rayher jump rings Ø 7.0 mm – connecting rings for jewellery parts

Rayher jump rings are connecting rings with a diameter of 7.0 mm. You can use them to join jewellery parts that have closed eyelets, for example on necklaces, bracelets and pendants, or to repair jewellery. The pack contains 30 pieces.

The rings have a material thickness of 1 × 1 mm and can be opened and closed again with two pairs of pliers. Choose your colour from the options.

How to open and close the rings

Grip the ring with a pair of pliers on each side of the opening. Move one pair of pliers towards you and the other away from you, so that the ring twists open sideways. If you pull it apart instead, it loses its shape and will not close properly later. Then attach the eyelet and the pendant or chain end, and twist the ring back in the opposite direction until the ends sit flush against each other.

What this size is suited to

With a diameter of 7.0 mm and a material thickness of 1 mm, the rings suit eyelets on jewellery parts that are not too large. They work for necklaces, bracelets and pendants as well as for repairs, when a link or an eyelet needs replacing.

Rayher jump rings Ø 7.0 mm product details

• Manufacturer: Rayher, art. no. 2224506
• Diameter: 7.0 mm
• Material thickness: 1 × 1 mm
• Contents: 30 pieces

You will also need: two pairs of pliers for opening and closing, for example flat-nose or round-nose pliers.