Rayher PET Rabbit Mould 68 x 123 x 18 mm for Raysin, Wax, Soap

Rayher PET Rabbit Mould – for Raysin, Concrete, Wax and Soap

The Rayher PET rabbit mould is what you need if you want to cast rabbits in Raysin, concrete, wax or craft soap, for example as Easter decorations or small gifts. The motif measures 12.3 × 6.8 cm and is up to 1.8 cm deep.

The mould is made of transparent, rigid PET with a material thickness of 750 µm. It is reusable, so you can cast the same motif as often as you like. The pouring temperature must not exceed 60 °C. This applies above all to wax and soap, which you should let cool accordingly before pouring.

Casting tips

Place the mould on a level surface so that the compound spreads evenly and the rabbit has a flat back. Pour in the casting compound and let it harden or set completely before carefully removing the motif from the mould. Do not pour wax or soap in at more than 60 °C, so that the mould does not warp.

Cleaning

After demoulding, wash the mould thoroughly with water and a little washing-up liquid. Once you have cast soap, wax, concrete or Raysin in a mould, do not use it for food again.

Rayher PET rabbit mould product details

• Manufacturer: Rayher, art. no. 36142000
• Size: 68 × 123 × 18 mm
• Material: PET plastic
• Material thickness: 750 µm
• Suitable for: Raysin, concrete, wax, craft soap
• Pouring temperature: up to 60 °C

You will also need: casting compound, for example Raysin, concrete, wax or craft soap

Do not expose the mould to extreme temperatures! Pouring temperature 60 °C at most.