Pracht Crimp End Cap Ø 2.0 mm, antique copper

Pracht end cap 2 mm in antique copper – for leather cords and ribbons

The Pracht end cap in antique copper finishes the ends of jewellery cords, leather cords and similar cords. You glue it onto the end of the cord with a little jewellery glue and then crimp it. The size is 2 mm and the pack contains 1 piece.

The antique copper shade suits jewellery pieces in copper or bronze tones. An end cap of the same type is also available in 3.0 mm. Measure the thickness of your cord before buying and choose the size accordingly.

Fitting the end cap

Cut the end of the cord straight so that it sits neatly in the end cap. Put a little jewellery glue into the end cap or onto the end of the cord, push the cord in and then crimp the end cap firmly shut. Leave the glue to harden fully before the cord is put under strain. Use only a little glue so that nothing oozes out and the cord does not look sticky.

Pracht end cap antique copper product details

• Manufacturer: Pracht, art. no. 2745-02987
• Size: 2 mm (Ø 2.0 mm)
• Colour: antique copper
• Contents: 1 piece

You will also need: jewellery glue; suitable pliers for crimping